.gitea/workflows/sonar.yaml

@@ -1,45 +0,0 @@
-# Name of the workflow, visible in the Gitea Actions UI
-name: Sonar analyzer
-
-# Defines the events that trigger this workflow
-on:
-  # Trigger on pushes to the 'master' branch
-  push:
-    branches:
-      - main
-
-# Definition of the jobs to be executed in the workflow
-jobs:
-  # Define the 'build' job
-  build:
-    # Name displayed for the job in the Gitea Actions UI
-    name: Sonar analyzer
-    runs-on: ubuntu-latest
-
-    # Definition of the steps within the 'build' job
-    steps:
-      # Step to checkout the repository code
-      # fetch-depth: 0 is important for SonarQube to analyze the full history
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0 # Shallow clones should be disabled for a better relevancy of analysis
-
-      # Step to run the SonarQube scan action
-      # This action handles the SonarQube scanner execution within a container
-      - name: Analyze with SonarQube
-        uses: SonarSource/sonarqube-scan-action@v5
-        # Environment variables required by the SonarQube scan action
-        env:
-          # SONAR_TOKEN and SONAR_HOST_URL must be configured as secrets in your Gitea repository
-          SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }}
-          SONAR_HOST_URL: ${{ secrets.SONAR_HOST_URL }}
-
-      # Optional step: Check the Quality Gate status
-      # Uncomment these lines if you want the job to fail if the Quality Gate is red.
-      # This is common practice to prevent merging/deploying code that doesn't meet quality standards.
-      - name: Wait for Quality Gate status
-        uses: SonarSource/sonarqube-quality-gate-action@v1
-        timeout-minutes: 5 # Maximum time to wait for the Quality Gate status
-        env:
-          SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }}

.gitignore

@@ -1,7 +1,7 @@
-*/dist/
+/dist/
 /.idea/
-*node_modules
+/node_modules
-/server/public/images/
+/public/images/
-*config.json
+/config.json
-*yarn-error.log
+/yarn-error.log
-/server/docs/
+/docs/

DOCME.md

@@ -8,5 +8,5 @@ Hier befinden sich Methoden und Klassen vom iTender, von Web-Client, über die W
 
 Die Bedienung dieser Dokumentation erscheint anfangs vielleicht holprig, allerdings ist sie leichter als gedacht.
 
-Du willst vermutlich hier hin →
+Du willst vermutlich hier hin ->
 [iTender Klasse](classes/iTender.iTender.html)

arduino/itender/.theia/launch.json

@@ -0,0 +1,8 @@
+{
+  // Use IntelliSense to learn about possible attributes.
+  // Hover to view descriptions of existing attributes.
+  "version": "0.2.0",
+  "configurations": [
+    
+  ]
+}

arduino/itender/itender.ino

@@ -1,337 +1,103 @@
 /**
- * @file itender.ino
+* Official proxy code for iTender GPIO Communication
- * @brief Official proxy code for iTender GPIO Communication via Serial.
+**/
- *
+#include <ArduinoJson.h>
- * This code acts as a communication bridge between an Arduino and a Raspberry Pi
+#include "HX711.h"
- * using JSON over a serial connection (USB). It allows the Raspberry Pi to
- * control Arduino GPIO pins (set digital/analog output, get digital/analog input)
- * and read sensor data (specifically from multiple HX711 load cells dynamically).
- */
 
-#include <ArduinoJson.h> // Include the ArduinoJson library for JSON parsing and serialization.
+// Define the size of the JSON buffer
-#include "HX711.h"     // Include the HX711 library for interacting with the load cell amplifier.
-
-// Define the size of the JSON buffer for incoming messages.
-// Adjust this size based on the maximum expected size of incoming JSON messages.
 #define JSON_BUFFER_SIZE 256
 
-// Create a static JSON document for incoming messages.
+// Create a JSON object for incoming messages
-// Static allocation is efficient but has a fixed size.
 StaticJsonDocument<JSON_BUFFER_SIZE> incomingJson;
 
-// Create a dynamic JSON document for outgoing messages.
+// Create a JSON object for outgoing messages
-// Dynamic allocation is more flexible but can lead to memory fragmentation on small microcontrollers.
 DynamicJsonDocument outgoingJson(JSON_BUFFER_SIZE);
 
-// --- Multiple HX711 Handling ---
-
-// Define the maximum number of HX711 sensors we can manage tare offsets for.
-// Adjust this based on available Arduino memory if needed.
-#define MAX_SENSORS 5
-
-// Structure to hold the pins and tare offset for a single sensor.
-struct SensorTare {
-  int dataPin = -1;
-  int clockPin = -1;
-  long tareOffset = 0;
-};
-
-// Array to store the tare offsets for multiple sensors.
-SensorTare sensorTareOffsets[MAX_SENSORS];
-
-/**
- * @brief Finds the index of a sensor in the sensorTareOffsets array based on its pins.
- * @param dataPin The data pin of the sensor.
- * @param clockPin The clock pin of the sensor.
- * @return The index of the sensor, or -1 if not found.
- */
-int findSensorTareIndex(int dataPin, int clockPin) {
-  for (int i = 0; i < MAX_SENSORS; i++) {
-    if (sensorTareOffsets[i].dataPin == dataPin && sensorTareOffsets[i].clockPin == clockPin) {
-      return i;
-    }
-  }
-  return -1; // Sensor not found
-}
-
-/**
- * @brief Adds or updates the tare offset for a sensor based on its pins.
- * @param dataPin The data pin of the sensor.
- * @param clockPin The clock pin of the sensor.
- * @param offset The tare offset to store.
- * @return The index where the offset was stored/updated, or -1 if the array is full.
- */
-int addOrUpdateSensorTare(int dataPin, int clockPin, long offset) {
-  int index = findSensorTareIndex(dataPin, clockPin);
-
-  if (index != -1) {
-    // Sensor found, update the offset
-    sensorTareOffsets[index].tareOffset = offset;
-    return index;
-  } else {
-    // Sensor not found, find the first available slot
-    for (int i = 0; i < MAX_SENSORS; i++) {
-      if (sensorTareOffsets[i].dataPin == -1) { // Found an empty slot
-        sensorTareOffsets[i].dataPin = dataPin;
-        sensorTareOffsets[i].clockPin = clockPin;
-        sensorTareOffsets[i].tareOffset = offset;
-        return i;
-      }
-    }
-  }
-  return -1; // Array is full
-}
-
-/**
- * @brief Gets the stored tare offset for a sensor based on its pins.
- * @param dataPin The data pin of the sensor.
- * @param clockPin The clock pin of the sensor.
- * @return The stored tare offset, or 0 if the sensor is not found.
- */
-long getSensorTareOffset(int dataPin, int clockPin) {
-  int index = findSensorTareIndex(dataPin, clockPin);
-  if (index != -1) {
-    return sensorTareOffsets[index].tareOffset;
-  }
-  return 0; // Return 0 offset if sensor not found (effectively untared)
-}
-
-// --- End Multiple HX711 Handling ---
-
-
 void setup() {
-  // Initialize serial communication at 9600 baud rate.
+  // Initialize serial communication
-  // This speed should match the serial communication speed on the Raspberry Pi.
   Serial.begin(9600);
-
-  // Initialize the sensorTareOffsets array.
-  for (int i = 0; i < MAX_SENSORS; i++) {
-    sensorTareOffsets[i].dataPin = -1; // Mark as empty
 }
 
-  // Optional: Wait for the serial port to connect.
+void (*resetFunc)(void) = 0;  //declare reset function @ address 0
-  while (!Serial);
-}
-
-// Declare a function pointer to address 0.
-// Calling this function effectively resets the Arduino.
-void (*resetFunc)(void) = 0;
 
 void loop() {
-  // Check if there is data available to read from the serial port.
   if (Serial.available()) {
-    // Read the incoming JSON message from the serial buffer.
+    // Read the incoming JSON message
-    // deserializeJson reads from the Serial stream until it finds a complete JSON object.
     DeserializationError error = deserializeJson(incomingJson, Serial);
-
-    // Check if deserialization was successful.
     if (error) {
-      // Handle deserialization error.
+      // Handle error
-      // You might want to send an error message back to the Raspberry Pi.
-      Serial.print(F("Deserialization failed: "));
-      Serial.println(error.f_str());
-      // Clear the serial buffer to prevent processing incomplete messages.
-      while (Serial.available()) Serial.read();
     } else {
-      // Deserialization was successful. Process the incoming message.
+      // Extract the "type" and "data" fields from the JSON object
-
-      // Extract the "id", "type", and "data" fields from the JSON object.
-      // The "id" is used to correlate requests and responses.
       String id = incomingJson["id"];
-      // The "type" determines the action to perform.
       int type = incomingJson["type"];
-      // The "data" field contains parameters for the action.
       JsonVariant data = incomingJson["data"];
 
-      // Create a nested object named "data" within the root outgoing JSON object.
+      // Create a nested object in the root object
-      // This will hold the response data.
       JsonObject outgoingData = outgoingJson.to<JsonObject>().createNestedObject("data");
 
-      // Assume success by default, set to false in case of errors within cases.
       outgoingData["success"] = true;
 
-      // Check if the 'data' field exists and is not null before accessing its members.
+      // Handle the message based on the "type" field
-      if (!data.isNull()) {
-        // Handle the message based on the "type" field using a switch statement.
       switch (type) {
-          case 1: // Handle SET_PIN message: Set the state of a GPIO pin.
+        case 1:
-            { // Use a block to scope variables declared within the case.
+          // Handle SET_PIN message
-              int pin = data["pin"];
+          pinMode((int)data["pin"], OUTPUT);
-              String mode = data["mode"];
+          if (data["mode"] == "DIGITAL") {
-              int value = data["value"];
+            digitalWrite((int)data["pin"], data["value"]);
-
-              // Set the pin mode to OUTPUT.
-              pinMode(pin, OUTPUT);
-
-              // Check the mode (DIGITAL or ANALOG).
-              if (mode == "DIGITAL") {
-                // For digital mode, write HIGH or LOW.
-                digitalWrite(pin, value); // Assuming value is 0 for LOW, 1 for HIGH.
-              } else if (mode == "ANALOG") {
-                // For analog mode (PWM), write a value between 0 and 255.
-                // Ensure the pin supports PWM output.
-                analogWrite(pin, value); // Use the value directly for PWM.
           } else {
-                 outgoingData["success"] = false;
+            analogWrite((int)data["pin"], (data["value"] == 255) ? HIGH : LOW);
-                 outgoingData["error"] = "Invalid mode for SET_PIN";
-              }
           }
           break;
-
+        case 2:
-          case 2: // Handle GET_VAL message: Get the current value of a GPIO pin.
+          // Handle GET_VAL message
-            { // Use a block to scope variables declared within the case.
+          pinMode((int)data["pin"], INPUT);
-              int pin = data["pin"];
-              String mode = data["mode"];
           int val;
-
+          if (data["mode"] == "DIGITAL") {
-              // Set the pin mode to INPUT.
+            val = digitalRead((int)data["pin"]);
-              pinMode(pin, INPUT);
-
-              // Check the mode (DIGITAL or ANALOG).
-              if (mode == "DIGITAL") {
-                // For digital mode, read HIGH or LOW.
-                val = digitalRead(pin);
-              } else if (mode == "ANALOG") {
-                // For analog mode, read the analog value (0-1023 for most Arduinos).
-                val = analogRead(pin);
           } else {
-                 outgoingData["success"] = false;
+            val = analogRead((int)data["pin"]);
-                 outgoingData["error"] = "Invalid mode for GET_VAL";
-                 break; // Exit the case after setting the error.
-              }
-              // Add the read value to the outgoing JSON data.
-              outgoingData["value"] = val;
           }
           break;
-
+        case 3:
-          case 3: // Handle GET_SENSOR message: Read data from a sensor (specifically HX711).
+          // Handle GET_SENSOR message
-            { // Use a block to scope variables declared within the case.
-              // Get the data and clock pins for the HX711 from the incoming data.
-              const int LOADCELL_DATA_PIN = (int)data["pin_data"];
-              const int LOADCELL_CLOCK_PIN = (int)data["pin_clock"];
-
-              // Check if pins are valid.
-              if (LOADCELL_DATA_PIN < 0 || LOADCELL_CLOCK_PIN < 0) {
-                 outgoingData["success"] = false;
-                 outgoingData["error"] = "HX711 data and clock pins not provided or invalid";
-                 break;
-              }
-
-              // Create a temporary HX711 object for this specific sensor.
-              HX711 currentScale;
-              currentScale.begin(LOADCELL_DATA_PIN, LOADCELL_CLOCK_PIN);
-
-              // Wait for the HX711 to be ready.
-              if (currentScale.wait_ready_timeout(1000)) { // Wait up to 1000ms
-                 // Get the raw value from the scale.
-                 long raw_value = currentScale.get_value(); // Use get_value() for raw reading.
-
-                 // Get the stored tare offset for these pins.
-                 long tare_offset = getSensorTareOffset(LOADCELL_DATA_PIN, LOADCELL_CLOCK_PIN);
-
-                 // Calculate the taried value.
-                 long taried_value = raw_value - tare_offset;
-
-                 // Add the taried value to the outgoing JSON data.
-                 outgoingData["value"] = taried_value;
 
           /*
-                 // Example calculation for weight in grams using a scale factor (requires calibration).
+          (WEIGHT_VAL - NO_WEIGHT_VAL) / Sensitivitätsfaktor = Gewicht in Gramm
-                 // You would need to store and retrieve the scale factor per sensor as well.
+          (WEIGHT_VAL - NO_WEIGHT_VAL) / (100g_val /100) ist die Formel zur Berechnung des Gewichts in Gramm nach der Kalibrierung mit einem 100 Gramm Gewicht.
-                 // currentScale.set_scale(calibration_factor);
+          100g_val /100 gibt den Sensitivitätsfaktor an, der angibt, wie viel sich der Sensorwert ändert, wenn sich das Gewicht um ein Gramm ändert.
-                 // long weight_grams = currentScale.get_units(10); // Get average of 10 readings with scale factor
+          Durch die Division von 100g_val durch 100 wird der Sensitivitätsfaktor berechnet, und durch die Division von (WEIGHT_VAL - NO_WEIGHT_VAL) durch den Sensitivitätsfaktor wird das Gewicht in Gramm berechnet.
-                 // outgoingData["grams"] = weight_grams;
+
+          Beispiel:
+          (WEIGHT_VAL - NO_WEIGHT_VAL) / (100g_val /100) = Gewicht in Gramm
+          (2400 - 2000) / (2450 /100) = 80 Gramm
           */
-
+          // HX711 circuit wiring
-              } else {
-                 outgoingData["success"] = false;
-                 outgoingData["error"] = "HX711 not ready or timeout";
-              }
-            } // Closing brace for case 3
-            break;
-
-          case 4: // Handle TARE message: Tare a specific HX711 sensor.
-            { // Use a block to scope variables declared within the case.
-              // Get the data and clock pins for the HX711 from the incoming data.
           const int LOADCELL_DATA_PIN = (int)data["pin_data"];
           const int LOADCELL_CLOCK_PIN = (int)data["pin_clock"];
+          HX711 scale;
+          scale.begin(LOADCELL_DATA_PIN, LOADCELL_CLOCK_PIN);
 
-              // Check if pins are valid.
+          // Get the weight value from the scale
-              if (LOADCELL_DATA_PIN < 0 || LOADCELL_CLOCK_PIN < 0) {
+          long weight_val = scale.get_units();
-                 outgoingData["success"] = false;
+          outgoingData["value"] = weight_val;
-                 outgoingData["error"] = "HX711 data and clock pins not provided or invalid";
+          break;
+        case 4:
+          resetFunc();  //call reset
+          break;
+        default:
+          // Handle unknown message type
+          outgoingData[""] = 0;
           break;
       }
 
-              // Create a temporary HX711 object for this specific sensor.
+      // Prepare the outgoing JSON message
-              HX711 currentScale;
-              currentScale.begin(LOADCELL_DATA_PIN, LOADCELL_CLOCK_PIN);
-
-              // Wait for the HX711 to be ready.
-              if (currentScale.wait_ready_timeout(1000)) { // Wait up to 1000ms
-                 // Get the current raw value to use as the new tare offset.
-                 long current_raw_value = currentScale.get_value();
-
-                 // Store this value as the tare offset for these pins.
-                 int index = addOrUpdateSensorTare(LOADCELL_DATA_PIN, LOADCELL_CLOCK_PIN, current_raw_value);
-
-                 if (index != -1) {
-                    outgoingData["message"] = "Sensor taried successfully";
-                    // Optionally return the new tare offset or taried value (which should be close to 0)
-                    // outgoingData["new_tare_offset"] = current_raw_value;
-                    // outgoingData["taried_value"] = current_raw_value - current_raw_value; // Should be 0
-                 } else {
-                    outgoingData["success"] = false;
-                    outgoingData["error"] = "Could not store tare offset, sensor array full";
-                 }
-
-              } else {
-                 outgoingData["success"] = false;
-                 outgoingData["error"] = "HX711 not ready or timeout for tare";
-              }
-            } // Closing brace for case 4
-            break;
-
-
-          case 5: // Handle RESET message: Reset the Arduino.
-            outgoingData["message"] = "Resetting Arduino";
-            serializeJson(outgoingJson, Serial); // Send response before reset
-            Serial.println(); // Send newline
-            delay(100); // Small delay to ensure message is sent
-            resetFunc();  // Call the reset function.
-            break;
-
-
-          default: // Handle unknown message type.
-            outgoingData["success"] = false;
-            outgoingData["error"] = "Unknown message type";
-            break;
-        }
-      } else {
-         // Handle case where the 'data' field is missing or null.
-         outgoingData["success"] = false;
-         outgoingData["error"] = "Missing or null 'data' field in incoming JSON";
-      }
-
-
-      // Prepare the root of the outgoing JSON message.
-      // Set the 'id' to match the incoming message for correlation.
       outgoingJson["id"] = id;
-      // Set the 'type' for the response (e.g., 0 for acknowledgment/response).
       outgoingJson["type"] = 0;
-      // The 'data' field was already created as a nested object.
+      outgoingJson["data"] = outgoingData;
 
-      // Send the outgoing JSON message to the serial port.
+      // Send the outgoing JSON message
       serializeJson(outgoingJson, Serial);
-      // Send a newline character to indicate the end of the JSON message.
       Serial.println();
-
-      // Clear the incoming JSON document to free up memory for the next message.
-      incomingJson.clear();
-      // Clear the outgoing JSON document.
-      outgoingJson.clear();
     }
   }
-  // Add a small delay to prevent the loop from running too fast when no data is available.
-  delay(1);
 }

doc/Notes.md

@@ -1,6 +1,6 @@
 # ### Achtung! \###
 Diese Datei ist nicht mehr aktuell.<br>
-Bitte nutze die neue Wiki unter [https://git.dateien.org/tobiash/itender/wiki](https://git.gaminggeneration.de/tobiash/itender/wiki) (Wiki des iTender Projekts)
+Bitte nutze die neue Wiki unter [https://git.gaminggeneration.de/tobiash/itender/wiki](https://git.gaminggeneration.de/tobiash/itender/wiki) (Wiki des iTender Projekts)
 
 <br><br><br><br><br><br><hr><br><br><br><br><br>
 
@@ -34,13 +34,13 @@ Was haben wir bereits am iTender Projekt gemacht?
 
 #### Erstes 3D-Modell
 
-<img src="Screenshot_Model1.1_FrontTopRight.png" width="50%">
+<img src="./Screenshot_Model1.1_FrontTopRight.png" width="50%">
-<img src="Screenshot_Model1.1_BackDownLeft.png" width="50%">
+<img src="./Screenshot_Model1.1_BackDownLeft.png" width="50%">
 
 #### Neues 3D-Modell
 
-<img src="Screenshot_Model1.2_Front.png" width="50%">
+<img src="./Screenshot_Model1.2_Front.png" width="50%">
-<img src="Screenshot_Model1.2_Back.png" width="50%">
+<img src="./Screenshot_Model1.2_Back.png" width="50%">
 
 
 <hr>

doc/installPi.sh

@@ -1,15 +1,12 @@
 #!/bin/bash
 
-# shellcheck disable=SC2034
-DEBIAN_FRONTEND=noninteractive
-
 if [ "$EUID" -ne 0 ]; then
   echo "Please run as root!"
   exit
 fi
 
 echo "Creating user if not exists"
-useradd -p $(`openssl passwd -1 iTender2025`) itender || true
+useradd -p $(openssl passwd -1 iTender2022) itender || true
 mkdir /home/itender/
 usermod -d /home/itender/ itender || true
 chown itender:itender /home/itender
@@ -18,8 +15,8 @@ echo "Updating indexes"
 apt update
 
 echo "Installing xserver xinit openbox ufw xserver-xorg x11 unclutter make chromium-browser crontab cmake g++ gcc and git..."
-apt install --no-install-recommends xserver-xorg x11-xserver-utils xinit openbox -y || exit
+apt install --no-install-recommends ufw xserver-xorg x11-xserver-utils xinit openbox -y || exit
-apt install git gcc g++ make cmake ufw chromium-browser unclutter iptables cron pigpio -y || exit
+apt install git gcc g++ make cmake chromium-browser unclutter iptables cron pigpio -y || exit
 echo "Try to uninstall node and npm... (Can fail)"
 apt purge node -y || true
 apt purge npm -y || true
@@ -32,15 +29,11 @@ echo "allowed_users=anybody" >/etc/X11/Xwrapper.config
 echo "Adding apt keys..."
 # Keys and stuff ---
 # Nodejs
-echo "Installing NodeJS"
+curl -fsSL https://deb.nodesource.com/setup_18.x | sudo -E bash
-curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.3/install.sh | bash
-\. "$HOME/.nvm/nvm.sh"
 
-# Download and install Node.js:
+# Yarn
-nvm install 22
+curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | sudo tee /usr/share/keyrings/yarnkey.gpg >/dev/null
-
+echo "deb [signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.com/debian stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
-# Download and install Yarn:
-corepack enable yarn
 
 # MongoDB
 wget -qO - https://www.mongodb.org/static/pgp/server-4.4.asc | sudo apt-key add -
@@ -62,6 +55,10 @@ echo "Installing mongodb and yarn..."
 apt install nodejs yarn mongodb-org -y
 apt upgrade -y
 
+adduser itender gpio
+adduser itender sudo
+chown itender:itender /home/itender/ -R
+
 # V2: Arduino CLI
 echo "Installing arduino-cli..."
 sudo -u itender mkdir -p /home/itender/bin
@@ -72,13 +69,6 @@ sudo -u itender /home/itender/bin/arduino-cli core install arduino:avr || true
 sudo -u itender /home/itender/bin/arduino-cli lib install ArduinoJson || true
 sudo -u itender /home/itender/bin/arduino-cli lib install HX711 || true
 
-
-# User rights
-adduser itender gpio
-adduser itender sudo
-chown itender:itender /home/itender/ -R
-
-
 echo "Installing autostart..."
 # Autostart
 cat <<EOT >/etc/xdg/openbox/autostart
@@ -94,11 +84,9 @@ sed -i 's/"exited_cleanly":false/"exited_cleanly":true/; s/"exit_type":"[^"]\+"/
 /usr/bin/chromium-browser --disable-infobars --kiosk --incognito --disable-pinch --overscroll-history-navigation=0 "http://127.0.0.1:3000/" &
 EOT
 
-
 echo "Setting to console autologin..."
 raspi-config nonint do_boot_behaviour B2
 
-
 echo "Installing bashrc"
 echo "clear" >>/home/itender/.bashrc
 echo "[[ -z \$DISPLAY && \$XDG_VTNR -eq 1 ]] && startx -- -nocursor >/dev/null 2>&1" >>/home/itender/.bashrc
@@ -113,7 +101,7 @@ else
   echo "Cloning..."
   sudo -u itender git config --global credential.helper store
   git config --global credential.helper store
-  git clone "https://itender:740e2cec4212ad058b09df3de5da73a372d73a1a@git.dateien.org.de/tobiash/itender.git" --quiet
+  git clone "https://tobiash:!IwedwrimmVeudiweN!@git.gaminggeneration.de/tobiash/itender.git" --quiet
 fi
 cd "$DIR" || exit
 yarn install
@@ -128,11 +116,10 @@ chown itender:itender /tmp/currentCron
 #install new cron file
 sudo -u itender crontab /tmp/currentCron
 
-
 echo "Installing systemd service..."
 cat <<EOT >/etc/systemd/system/itender.service
 [Unit]
-Description=iTender Service
+Description=iTender App
 After=network.target mongod.service
 StartLimitIntervalSec=1
 StartLimitBurst=1000
@@ -206,7 +193,7 @@ if ! grep -w "logo.nologo" /boot/cmdline.txt; then
   sed -i 's/console=tty0/console=tty3/' /boot/cmdline.txt
 fi
 
-echo "iTender© 2022-2025 - Official licensed software
+echo "iTender© 2022-2023 - Official licensed software
 Programmed by Tobias Hopp" >/etc/motd
 
 echo "[Service]

package.json

@@ -1,19 +1,59 @@
 {
   "name": "itender",
-  "version": "1.0.0",
+  "version": "2.2.8",
-  "main": "index.js",
+  "private": true,
-  "repository": "https://git.dateien.org/TobiasH/itender.git",
+  "author": "Tobias Hopp <tobi@gaminggeneration.de>",
-  "author": "Tobias Hopp <thopp@conet.de>",
+  "license": "UNLICENSED",
-  "license": "MIT",
-  "devDependencies": {
-    "@types/node": "^22.15.14",
-    "concurrently": "^9.1.2",
-    "typescript": "^5.8.3"
-  },
   "scripts": {
-    "dev": "concurrently \"npm run --prefix web dev\" \"npm run --prefix server watchTS\""
+    "boot": "yarn && yarn run compile && yarn run start",
+    "start": "DEBUG=itender:* node --trace-warnings ./dist/main.js",
+    "compile": "tsc && webpack",
+    "compileStart": "yarn run compile && yarn start",
+    "watchTS": "tsc --watch",
+    "watchWP": "webpack --watch",
+    "doc": "typedoc"
   },
   "dependencies": {
-    "nodemon": "^3.1.10"
+    "@serialport/parser-readline": "^10.5.0",
+    "@types/cookie-parser": "^1.4.3",
+    "@types/debug": "^4.1.7",
+    "@types/express": "^4.17.14",
+    "@types/express-ws": "^3.0.1",
+    "@types/mongoose": "^5.11.97",
+    "@types/morgan": "^1.9.3",
+    "@types/node": "^18.11.9",
+    "@types/rpi-gpio": "^2.1.1",
+    "@types/rpi-ws281x-native": "^1.0.0",
+    "@types/serialport": "^8.0.2",
+    "@types/sharp": "^0.31.1",
+    "axios": "^1.3.2",
+    "buffer": "^6.0.3",
+    "cookie-parser": "^1.4.6",
+    "debug": "^4.3.4",
+    "detect-rpi": "^1.4.0",
+    "express": "~4.16.1",
+    "express-ws": "^5.0.2",
+    "hc-sr04": "^0.0.1",
+    "http-errors": "~1.6.3",
+    "mongoose": "^6.7.2",
+    "morgan": "^1.10.0",
+    "net-ping": "^1.2.3",
+    "onoff": "^6.0.3",
+    "pi-hx711": "^1.2.0",
+    "pug": "^3.0.2",
+    "rpi-gpio": "^2.1.7",
+    "rpi-ws281x-native": "^1.0.4",
+    "serialport": "^10.5.0",
+    "sharp": "^0.31.3"
+  },
+  "devDependencies": {
+    "nodemon": "^2.0.20",
+    "ts-loader": "^9.4.1",
+    "ts-node": "^10.9.1",
+    "typedoc": "^0.23.24",
+    "typedoc-plugin-missing-exports": "^1.0.0",
+    "typescript": "^4.8.4",
+    "webpack": "^5.74.0",
+    "webpack-cli": "^4.10.0"
   }
 }